Unpacking - GE FGC TLE Series Manual

4.6

UNPACKING

Move the equipment in it's original packing, carton box or wooden case, until the place of installation
and remove the packing and the transport sockets only just before installing the UPS.
Be aware of the heavy weight of the UPS, pay attention when moving the UPS cabinet.
White color
Red color
Fig. 4.6-1 ShockWatch device
Fig. 4.6-2 TiltWatch device
NOTE !
Take care not to damage the UPS when moving by forklift.
A damaged UPS must never be installed or connected to Utility or Battery!
In case of any damage sustained during the transport, immediately inform the
shipping agent!
A detailed report of the damage is necessary for any indemnity claim.
Included in the delivery you can find the following parts:
• An accessories bag.
• Air inlet grids, which must be mounted on the bottom of the cabinet UPS with the screws included.
• Bus bars interconnection "Power Section cabinet" and "In/Out Module cabinet".
• Junctions metal parts to connect "Power Section cabinet" and "In/Out Module cabinet".
• XD1 (46P) & XD2 (32P) control cable interconnection.
• Control Bus cables for inter-connecting the UPS modules (only For the RPA system).
• The documentation includes the "Installation Guide & User Manual" and the "UPS Safety Rules".
PACKING MATERIAL RECYCLING
GE, in compliance with environment protection, uses only environmentally
friendly material.
UPS packing materials must be recycled in compliance with all applicable
regulations.
Modifications reserved
GE_UPS_ISG_TLE_SUL_M62_1M0_2US_V010.docx
Critical Power
= without any anomaly
= anomaly evidence
The package of the TLE Series 625 - 750 -
1000 is equipped with ShockWatch
(indicator for shock) and TiltWatch
(indicator for overthrow) on the outside.
These devices indicate an eventual shock
or overthrow during transport.
Whenever these devices
possible anomaly, the UPS shall not be
commissioned.
Please contact your
Center".
Installation Guide TLE Series 625 - 750 - 1000 UL S2
show a
"GE Service
Page 23/69