GE FGC TLE Series Manual page 80

40-150 kva/kw, 480 vac three phase highly efficient and scalable
Table of Contents

Advertisement

Congratulations on your choice of a TLE Scalable Series 40 – 150 Uninterruptible Power
Supply (UPS).
It will help eliminate load disturbances due to unexpected power problem.
This User Manual describes the function of the UPS module, the purpose and location of
the switches, the meaning of the system events related to the front panel indication, and
provides procedures for starting and stopping the equipment.
Please refer to the accompanying Installation Guide, which describes how to prepare the
installation site, and it provides weight, dimensions and procedures for moving, installing
and connecting the UPS.
While every care has been taken to ensure the completeness and accuracy of this manual,
assumes no responsibility or liability for any losses or damages resulting from the use
GE
of the information contained in this document.
WARNING!
TLE Scalable Series 40 – 150 is a product that needs to be installed by a licensed and
knowledgeable contractor.
Installation restrictions or additional measures may be needed to prevent disturbances.
We recommend that this manual be kept next to the UPS for future references.
If any problems are encountered with the procedures contained in this manual, please
contact your Service Center before you proceed.
This document shall not be copied or reproduced without the permission of GE.
Some of the information contained in this manual may be changed without notice to
reflect technical improvements.
Read the safety instructions contained on the following pages carefully before the
installation of the UPS, options and battery system.
Pay attention to the rectangular boxes included in the text:
They contain important information and warning concerning electrical connections and
personnel safety.
Modifications reserved
GE_UPS_USM_TLE_SUL_40K_M15_1US_V010.docx
Critical Power
Preface
Safety instructions
Parallel System version secured with RPA
When included in the text, this symbol refers to operation needed
only for RPA Parallel System.
User Manual TLE Scalable Series 40 - 150 UL S1
Page 4/90

Advertisement

Table of Contents
loading

Table of Contents