Section 6: Post-Installation Activities; Upgrading The Gateway Firmware; 1: To Upgrade Before Commissioning The Gateway - Honeywell HON-CGW-MBB Installation And User Manual

The system maintenance provider is responsible for the maintenance and upkeep of the
CLSS Gateway. The maintenance involves avoiding potential issues, making regular
backups, restoring data when required, collecting data for troubleshooting, and other
activities.

6.1 Upgrading the Gateway Firmware

CLSS Service Manager notifies the gateway administrators when a new firmware is
launched. The administrators can perform the upgrade at a planned time.
CAUTION: BEFORE UPGRADING ENSURE TO GET PERMISSION FROM THE SITE. THE REBOOT AFTER THE
!
UPGRADE SHOULD BE AT A MUTUALLY PLANNED TIME WITHOUT AFFECTING THE OPERATION.
The upgrade happens in the background while the system is running. After the upgrade
the gateway will reboot.
CAUTION: PREVENT ANY DISTURBANCE TO THE POWER CABLE OF THE GATEWAY DURING THE UPGRADE.
!
6.1.1 To Upgrade Before Commissioning the Gateway
1. Connect the gateway to Internet.
NOTE:
- The Internet connection can be either wireless or LAN.
- The LED indicator DL4 on the gateway flashing Green confirms Internet connection.
2. Log onto the CLSS Site Manager.
3. Click VIEW on the notification at the top.
Or
Click the SETTINGS icon at the bottom left.
4. Click Gateway Management in the Settings page.
5. Click Add Gateway on top.
CLSS Gateway - Installation and Users' Manual | P/N:LS10248-000HW-E | REV. F | FEB/11/2022

Section 6: Post-Installation Activities

37