Honeywell HON-CGW-MBB Installation And User Manual page 10

Connected life safety services clss gateway
Table of Contents

Advertisement

Revision History
Date
October 20, 2020
January 07, 2021
Rev. C
February 15, 2021
Rev. D
March 08, 2021
Rev. E
April 30, 2021
August 15, 2021
Rev. F
January 31, 2022
CLSS Gateway - Installation and Users' Manual | P/N:LS10248-000HW-E | REV. F | FEB/11/2022
Table 1.2: Dates and Changes (Continued)
• Added the gateway to panel connection procedures in Appendix C.
The panels are: ESSER, Gent, Morley IAS, NOTIFER UL, and
NOTIFIER EN.
• Updated for the NYC Fire Department certification.
Added the Fire-Lite panel connection procedure in Appendix C.
Added the brand selection feature details
Revision changed for the release process.
• Added the Modbus connection details
• Added the connection procedures for the following:
– AM Series Panels
– VESDA® Detectors
– INSPIRE Panels
– Fire-Lite® Panels
– FireWarden Panels
• 1.1 About This Manual: Added the Usages section
• 1.6 Approvals: The UL details brought at the beginning
• 1.6 Approvals: The FCC icon added in the FCC statement
• Figure 2.1: The OC Code label added
• Table 2.1: Label Name column and the OC code details added
• 2.5 Security Recommendations: Added this section
• Figure 3.4: Eth1 and Eth0 identified
• 4.4 Honeywell CLSS Alarm Transmission Services: Updated for NOC
• Appendix C: Removed the Fire-Lite connection procedure
• Appendix C: Updated the FireWarden connection section with
firmware details and additional notes
• Figure C.2: Eth1 and Eth0 identified
• C.5 FireWarden Panels: Minimum required versions details updated
• C.11 VESDA® Detectors: Minimum required versions details
updated
• Table 2.1: Usage description updated for RS-485B, RS-485A, and
UART/TTL
• 2.4 CLSS Gateway Parts: Added this new section
• Section 3: Security Recommendation: Added this new chapter
• 7.2 Functionality: Number of monitored FACPs changed to 10
• Figure 7.1: Eth1 and Eth0 are changed to Ethernet
• Figure 7.2: Eth1 and Eth0 are changed to Ethernet
• Figure 7.3. Eth1 and Eth0 are changed to Ethernet
• 7.8 Replacing the Modbus Gateway (Modbus-GW): Added this new
section
Change Details
General Information
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents