Section 5: Configurations; Commissioning The Gateway; 1: The Commissioning Steps; 2: Exporting Panel's Topology Data - Honeywell HON-CGW-MBB Installation And User Manual

Connected life safety services clss gateway

Table of Contents

The gateway settings control the gateway's communications with the mobile, panel,

detectors, and CLSS Site Manager.

5.1 Commissioning the Gateway

You can commission the CLSS Gateway for an already added customer or for a new

customer.

5.1.1 The Commissioning Steps

Step 1: Connect to the IP network through the Ethernet 1 port of the gateway for the

CLSS Site Manager.

Step 2: Send the panel's topology onto the CLSS Site Manager.

Refer to the

Step 3: Connect the gateway to a panel.

Refer to the

Step 3: Configure the gateway to use the connected panel.

Refer to the

Steps 4: Inspection and maintenance of the gateway.

5.1.2 Exporting Panel's Topology Data

The first-time commissioning of the gateway includes uploading the panel's topology

data to the CLSS Site Manager.

NOTE: The topology data is exported using the supported panel manufacturer's

programming tool. To know about their recommended tool for exporting and related

configurations, refer to the panel's documentation.

To Export the Topology Data

1. Using the tool, which the panel manufacturer recommends, export the panel's

topology data into your configuration computer.

2. From the configuration computer, log into the Connected Life Safety Services

application.

3. Ensure that the relevant customer, site, and building details are available in the

application.

4. Select the building where the panel is located.

5. Go to the building's inventory page.

6. Click on the Config File button, find the exported topology data file, and select that

file.

7. Wait for the upload success message.

8. Confirm that the inventory page shows details of the panel's connected devices.

5.1.3 To Configure via the Wireless Connection

1. In the mobile device, download the Connected Life Safety Services App from Play Store

or App Store.

2. Install the App.

3. From the Honeywell on-boarding email, note down the login credentials.

4. On the mobile device, log into the CLSS App.

5. On the App's dashboard, at the right bottom, tap the More icon (see

CLSS Gateway - Installation and Users' Manual | P/N:LS10248-000HW-E | REV. F | FEB/11/2022