Appletalk - Lexmark Optra W810 Setup Manual

Note:
For information about
choosing PSERVER or
RPRINTER mode, look on the
Drivers, MarkVision and Utilities
CD. Click
View Documentation
and then click
MarkNet Print
.
Servers

AppleTalk

Note:
MarkVision for Macin-
tosh is on the Drivers,
MarkVision and Utilities CD.
8
Configure the MarkNet print server:
a
Set a unique NetWare login name.
This is the name the print server uses to log in to the
NetWare server.
b
Enable the MarkNet port.
c
Select PSERVER mode.
-- If you want to manage NDS queues, you must specify the
NDS tree and context where the print server is defined.
You also need to create or select queues to be serviced.
-- If you want to manage bindery queues, you must first
specify the file servers. Afterward, you must create or
select queues to be serviced.
d
If prompted to reset the print server, select
diately begin servicing the queues.
Your MarkNet print server works automatically with AppleTalk net-
works. You simply connect the power and the network cables, and
you're up and running.
However, if you would like to use a zone and printer name different
from the defaults, you can use MarkVision for Macintosh to change
these settings.
Yes
Set up network addresses
to imme-
163