Securing The Stabilizing Bar - Lexmark Optra W810 Setup Manual

Securing the
stabilizing bar
CAUTION!
The mailbox weighs 28 kg
(62 lb) and requires two people to lift it
safely.
1
Have someone help you stand
the mailbox upright.
2
Use the cutout on the card-
board panel to pull the
cardboard off the mailbox.
3
Locate the stabilizing bar on
the bottom of the mailbox.
One end of the stabilizing bar has
a tab with a screw hole in it, and
the other end has a roller on it.
4
Slide the stabilizing bar under
the mailbox until the end that
has a screw hole in it is flush
with the mailbox.
The end that has a roller on it
extends all the way out the oppo-
site side.
5
Secure the stabilizing bar to the
bottom of the mailbox with a
wing nut.
Set up the optional mailbox
75