Step 13: Load Markvision And Drivers - Lexmark Optra W810 Setup Manual

Step 13: Load MarkVision and
Note:
If you have infrequent
access to a CD-ROM drive, you
can create installation diskettes
from the CD.
Note:
To use your printer most
effectively, we recommend that
you install the custom Lexmark
printer drivers appropriate for
your printing environment.
152
Load MarkVision and drivers
drivers
The Drivers, MarkVision and Utilities CD contains printer drivers and
utilities for Windows, Macintosh, and OS/2 environments. Drivers are
available for both PCL and PostScript emulations.
In addition to printer drivers, the CD includes several network setup
and management utilities. If you're setting up your Optra W810 in a
network environment, you may want to read Step 14: "Set up network
addresses" on page 155 before launching the CD. That section pro-
vides helpful information about the software components you may
need to install on your system.
1
Launch the CD.
If the CD does not auto-launch when inserted in the drive, refer
to the CD booklet for information about launching the CD in
your system environment.
If necessary, you can change the language of the text the CD
displays on the screen. This also changes the language of the
text displayed on the user interface screens for the drivers and
utilities you choose to install.
2
Choose a task.
The CD offers easy access to utilities that help you install driv-
ers, set up a network, or view documentation related to
network setup and printer management. If you're operating in a
Windows environment, you can also register your printer
online.
At any time the CD is running, press F1 for online Help. Refer
to the CD Readme for the latest information about the contents
of the CD.