Linking Trays - Lexmark Optra W810 Setup Manual

Linking trays

7
When the correct paper size appears on the second line of
the display, press
default for tray 1.
8
If you need to change the Paper Size setting for another
source, press
and then repeat steps 5 through 7.
9
When you are finished changing the Paper Size settings,
press the button to return the printer to the Ready
Go
state.
If you load the same paper size and type in more than one tray, the
printer automatically links the trays: when one tray is empty, paper
feeds from the next linked tray. By linking the trays on the standard
Optra W810 printer model, you can effectively create a single paper
source that holds up to 1250 sheets. If you installed an optional
drawer, you can also link that tray for a total capacity of 1750 sheets
or 3750 sheets, depending on the capacity of the optional drawer.
When the printer is shipped from the factory, tray linking is not
enabled. The factory default Paper Types for the three standard trays
are:
• Tray 1 = Custom Type 6
• Tray 2 = Plain Paper
• Tray 3 = Custom Type 3
To initiate tray linking:
1
Load paper of the same size and type in all the trays you
want to link.
See page 121 for complete paper loading instructions.
2
Make sure the printer recognizes the same paper size is
loaded in each tray:
a
If you're linking tray 1, make sure you selected the cor-
rect size from the Tray 1 Size menu.
See page 148 for more information.
again to save the size as the
Select
to scroll to the appropriate source,
Menu>
149
Verify setup