Loading Trays 2 And 3 - Lexmark Optra W810 Setup Manual

Loading trays 2 and 3

Note:
If you installed an optional
500-sheet drawer, the instructions are
the same for loading paper in that tray
(tray 4).
9
Make sure the pressure plate is
pressed down inside the tray.
Whenever you pull open the tray,
make sure the pressure plate is
snapped down before pushing the
tray back into the printer.
10
Push the tray firmly into the
printer.
If the tray is not pushed com-
pletely into the printer, text and
images may print in the wrong
position on the page, and the mar-
gins may appear incorrect.
Trays 2 and 3 each hold 500 sheets of
A3, A4, B4, 11x17, letter, or legal size
paper. Load only paper in trays 2 and 3.
Follow the instructions beginning on
page 128 to load trays 2 and 3.
Load paper
127