Step 14: Set Up Network Addresses; Printing A Network Setup Page - Lexmark Optra W810 Setup Manual

Step 14: Set up network
Note:
Make sure you always
use the latest version of the
Drivers, MarkVision and Utilities
CD available to you. Visit the
Lexmark Web site for the most
recent software and documenta-
tion updates.
Printing a network
setup page
addresses
We have provided some helpful hints for setting up your network
addresses. If you need additional setup information or troubleshoot-
ing tips, refer to the documents on the Drivers, MarkVision and
Utilities CD. After launching the CD, click
then click
MarkNet Print Servers
If you used an internal print server to attach your printer to a network,
use the printer operator panel to print a network setup page. The net-
work setup page shows the physical address, known as the
universally administered address (UAA), of the print server and other
important data.
To print a network setup page:
1
From the operator panel, press
2
Continue to press and release
TIES MENU
3
Press
4
ress
P
server is installed in network connector 1) or
(if the print server is installed in network connector
Setup
2).
5
Press
The network setup page prints.
.
.
.
Select
until you see
Menu>
again.
Select
View Documentation
to enter the menus.
Menu>
until you see
Menu>
(if the print
Print Net1 Setup
Print Net2
Set up network addresses
and
UTILI-
155