Attaching the
operator panel overlay
If English is not your preferred language,
attach the overlay with the appropriately
translated button names to the printer
operator panel.
1
Locate the overlay packaged
with your printer.
2
Peel the protective backing off
the overlay.
3
Align the holes in the overlay
with the buttons on the opera-
tor panel and press it into
place, as shown.
4
Peel the protective covering
away from the overlay.
You'll find instructions for changing the
language of the menus and messages
displayed on the operator panel display
in Step 12: "Verify setup" on page 145.
Set up the printer
31