Electronic emission
With a network card installed
Warning!
When a network card is
installed, this is a Class A product. In a
domestic environment, this product may
cause radio interference, in which case,
the user may be required to take
adequate measures.
A
Electronic emission information for your printer varies,
notices
depending on whether or not you have a network card
installed.
Federal Communications Commission (FCC)
Compliance Information Statement
The Lexmark Optra W810 laser printer, Type 4023, has been
tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
The FCC Class A limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own
expense.
Notices
167
Notices