Moving The Printer - Lexmark Optra W810 Setup Manual

Rear view
4
Select a location for your printer

Moving the printer

Front view
At some point in the future you may
decide to move the printer to a new loca-
tion. The User's Reference provides
details about removing options before
moving the printer.
If you're going to move the printer, keep
the following in mind:
•
Because the printer is heavy
(approximately 44 kg [97 lb] con-
figured with all the standard
drawers), two people are required
to lift it safely. Always be sure to
use the handholds, shown in the
figure at left, when you lift the
printer.
•
Remove the photoconductor car-
tridge before you move the printer.
Protect the cartridge from light by
covering it with a cloth.
•
Be sure to plug the printer into a
properly grounded outlet in the
new location.
•
If you need to move the
2500-sheet drawer sometime after
setup, you can roll the drawer a
short distance. If you need to lift
the drawer during the move, use
the handles located at each of the
four corners of the drawer.