Features - Remote Control; Top Of Remote Control; Front Of Remote Control - Kohler K-4026 Homeowner's Manual

Manual Flush
Signal Window
Preset 1 & 2
Stop
Selection Adjustment
Arrows
Menu

Features - Remote Control

Top of Remote Control

Manual Flush - Press to flush the toilet.
Presets 1 and 2 - Allows two sets of user settings to be saved. Select one of these buttons to use the
settings saved with that preset.
Wake Up - Press to activate the remote control when it is hibernating.
Seat Cover Close - Press to close the cover.
Seat Cover Open/Seat Close - Press to open the seat cover or close the seat.
Seat and Seat Cover Open - Press to open the seat cover and seat.
Signal Window - Signal emanates from this area. The signal window should not be covered when
the remote control is in use.

Front of Remote Control

Stop - Press to stop the cleansing wash and deodorizer.
Selection Adjustment Arrows - Press to change the selections shown in the display window, adjust
settings, or change the options on features.
Menu - Press to activate or deactivate features, program features, and program the clock.
Front - Press to activate the front wash.
Rear - Press to activate the rear wash.
Pulsate - Press to activate pulsating action from the cleansing wand. Water pressure will vary while
pulsating action is activated.
1221754-5-C
Wake Up
Stop
Menu
Time Display
Temperature
Pressure
Selection Box
Wand Position
Seat Cover Close
Front Rear
Pulsate Oscillate
Deodorizer Dryer
Infrared Sending Indication
Battery Low Display
Power Save
Auto Flush
Preset
Auto Open/Close
4
Signal Window
Seat and Seat Cover Open
Seat Cover Open / Seat Close
Front Wash
Rear Wash
Oscillate
Dryer
Pulsate
Deodorizer
Kohler Co.