Install The Remote Control - Kohler Karing K-77780-0 Installation Manual

38" (965 mm)–
66" (1676 mm)
Docking Station

7. Install the Remote Control

NOTE: For commercial applications, install the commercial mounting bracket and the dock plate.
NOTE: To pair the remote control to the toilet, consult the Homeowners Guide for instructions.
Position the mounting bracket in the desired location on the wall and mark the location of the screw
holes. Remove the bracket.
Drill 1/4" holes at each of the screw locations.
Install an anchor in each of the holes.
Attach the mounting bracket to the wall using the two supplied screws.
Install the batteries into the docking station (consult the Homeowners Guide for instructions if
needed).
Residential
Attach the docking station to the mounting bracket.
Place the remote control on the docking station.
Commercial
To make the remote control tamper resistant, secure the remote control to the docking station using
the supplied washer and screw.
Install the dock plate to the docking station with the four screws.
Position the docking station into the mounting bracket, which will be offset to the left.
Slide the docking station to the right.
1288209-2-D
Residential
Mounting Bracket
36"
(914 mm)
Tamper Resistant
Screw and Washer
(Optional)
10
Commercial
Mounting Bracket
Dock Plate
Docking
Station
Kohler Co.