Pairing A Remote Control - Kohler Quiet-Close C3-455 Homeowner's Manual

Grounding Instructions (cont.)
NOTICE: Follow local codes when determining the connection
type. The temporary connection may not be permitted by local
electrical codes.
NOTICE: To avoid possible product malfunction, do not plug in the
seat until instructed.
Preferred Connection
Connect the grounding plug into a grounded outlet that has the
same configuration as the plug.
Temporary Connection
NOTICE: Unless the outlet cover screw is grounded through the
house wiring, attaching the adapter grounding screw tab to the
cover screw will NOT ground the unit. If there is any doubt
whether the cover screw is grounded, have it checked by a qualified
electrician or service professional.
A temporary connection with a two-prong adapter may be used if
a properly grounded outlet is not available.
The temporary adapter should be used only until a properly
grounded outlet can be installed by a qualified electrician.
The green colored rigid ear, lug, and the like extending from the
adapter must be connect to a permanent ground such as a
properly grounded outlet box cover. Whenever the adapter is
used, it must be held in place by the screw.

Pairing a Remote Control

A remote control must be paired with the seat before use. The
remote included should already be paired with your seat. If a
replacement remote is required, follow the instructions below to
pair it with your seat.
Only one remote control can be paired with the seat at a time.
Bring the new remote control near the seat.
Make sure that all other remote controls have been removed from
the area of the seat.
Press and hold the "Dryer" icon until the icon flashes.
Simultaneously press and hold the "Front" and "Rear" icons on
the seat until a beep is heard.
Kohler Co. 5 1381632-5-A