Keep Alive Interval
Register Expiration
Local SIP Port
Local RTP Port
Auto On-Hook Timer(s)
Ring Timeout
SIP Transport
SIP Proxy Compatibility
Mode
Unregister On Reboot
Whitelist
Whitelist
SIP Phone Number Whitelist
Wallpaper
Screen Resolution 1024 x
600
Screen Resolution 800 x 400
Screen Resolution 480 x 272
Specify how often the phone will send a blank UDP packet to the SIP server
in order to keep the "ping hole" on the NAT router to open. Valid range is
10-160.
Specify the Register Expiration.
Configure Local SIP Port.
Configure Local RTP Port.
Configure Auto On-Hook Timer(s).
Configure Ring Timeout.
Select either UDP, TCP or TLS/TCP as SIP transport protocol.
Select either to disable or enable SIP Proxy Compatibility Mode.
Select either to disable or enable Unregister On Reboot.
Select either to enable or disable Whitelist
Configure the SIP Phone Number Whitelist.
Table 29: Global Policy Parameters – Customization
Check this option if the SIP end device shall use 1024 x 600 resolution for
the LCD screen wallpaper.
Source
Configure the location where wallpapers are stored.
File
If "URL" is selected as source, specify the URL of the wallpaper file. If
"Local UCM Server" is selected as source, click to upload wallpaper
file to the UCM630X.
Check this option if the SIP end device shall use 800 x 400 resolution for
the LCD screen wallpaper.
Source
Configure the location where wallpapers are stored.
File
If "URL" is selected as source, specify the URL of the wallpaper file. If
"Local UCM Server" is selected as source, click to upload wallpaper
file to the UCM630X.
Check this option if the SIP end device shall use 480 x 272 resolution for
the LCD screen wallpaper.
Source
UCM630X Series User Manual
Version 1.0.2.25
P a g e
|
99