Status; Table 8: Gvr3550 Email Settings Parameters Specifications - Grandstream Networks GVR3550 User Manual

GVR3550 USER MANUAL
MAIL SETTINGS
The GVR3550 could set alarm action to send Email, the procedures are as follows:
1. Set SMTP server and input the SMTP server address.
2. Input the Email subject, sender address, username and password.
3. Set receiver address.The GVR3550 could set 3 receiver addresses according to varied requirements to send the
alarm to different receivers.
4. Set send interval, one alarm would send only one Email within the interval.
5. Set Email subject and template. The GVR3550 is equipped with default ones, users could also customize them
by reference to the template rule.
6. Input the Email address, click on the "Test" button to testify whether the settings is correct.
Parameters Keyword
1
$name
2
$time
3
$channel
4
$mac
5
$ip
6
$port
7
$protocol
8
$keyword
9
$content

Table 8: GVR3550 Email Settings Parameters Specifications

STATUS

Status includes System Info , Network Status, HDD Info and Device Status .
SYSTEM INFORMATION
Users could view GVR3550 serial number and version information, as shown in figure 52 below.
Grandstream Networks, Inc.
Specification
Alarm Name
Time to trigger the alarm
Channel No. to trigger alarm
MAC address to trigger alarm
IP address to trigger alarm
Port No. to trigger alarm
Protocol type to trigger alarm(Only valid for illegal
software alarm)
Keyword to trigger alarm(Only valid for keyword
alarm)
Summary to trigger alarm(Only valid for keyword
alarm )
GVR3550 User Manual
Firmware Version 1.0.0.0
Page 47 of 76
Last Updated: 10/2013