Grandstream Networks UCM630 Series User Manual page 142

Monitor privilege control
Add members from "Available Extensions" to "Selected Extensions" so that the
Allowed to
call-barging selected extensions can spy on the used extension using feature code.
Seamless transfer privilege control
Any extensions on the UCM can perform seamless transfer. When using Pickup Incall
Allowed to
feature, only extensions available on the "Selected Extensions" list can perform
seamless transfer
seamless transfer to the edited extension.
Other Settings
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM630X, which can be configured in
the
Ring Timeout
PromptCustom Prompt: General Preference. The valid range is between 5 seconds
and 600 seconds.
Note: If the end point also has a ring timeout configured, the actual ring timeout used
is the shortest time set by either device.
Enable automatic recording for the calls using this extension. The default setting is
Auto Record
disabled. The recordings can be accessed under Web GUICDRRecording Files.


Skip Trunk Auth

If 'Skip Trunk Auth' is set to 'By Time', select a time condition during which users can
Time Condition for
Skip Trunk Auth skip entering password when making outbound calls.
Dial Trunk
Configure personal password when making outbound calls via trunk.
Password
Enable LDAP If enabled, the extension will be added to LDAP Phonebook PBX list.
Enable WebRTC
Enable registration and call from WebRTC.
Support
If enabled, the system will create a room whose room number, by default, will equal
Bind PMS Room the extension number in PMS module. Note: If this room already exists, the
configuration of the existing room will be overwritten.
Specify which Music On Hold class to suggest to the bridged channel when putting
Music On Hold
them on hold.
Call Duration Limit The maximum duration of call-blocking.
Maximum Call
The maximum call duration (in seconds). The default value 0 means no limit.
Duration
global ring timeout
If set to "yes", users can skip entering the password when making outbound calls.
If set to "By Time", users can skip entering the password when making outbound
calls during the selected time condition.
If set to "No", users will be asked to enter the password when making outbound
calls.
UCM630X Series User Manual
Version 1.0.2.25
setting under Web GUIPBX SettingsVoice
P a g e | 142