Grandstream Networks UCM630 Series User Manual page 45

MTU Specifies the maximum transmission unit value. Default is 1500.
IPv4 Address
Preferred DNS
If configured, this will be used as the Primary DNS server.
Server
WAN (when "Method" is set to "Route")
IP Method Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
IP Address Enter the IP address for static IP settings. The default setting is 192.168.0.160.
Subnet Mask Enter the subnet mask address for static IP settings. The default setting is 255.255.0.0.
Gateway IP Enter the gateway IP address for static IP settings. The default setting is 0.0.0.0.
DNS Server 1 Enter the DNS server 1 address for static IP settings. The default setting is 0.0.0.0.
DNS Server 2 Enter the DNS server 2 address for static IP settings.
Username Enter the username to connect via PPPoE.
Password Enter the password to connect via PPPoE.
Layer 2 QoS
802.1Q/VLAN Assign the VLAN tag of the layer 2 QoS packets for WAN port. The default value is 0.
Tag
Layer 2 QoS
802.1p Priority Assign the priority value of the layer 2 QoS packets for WAN port. The default value is 0.
Value
LAN (when Method is set to "Route")
IP Address Enter the IP address assigned to LAN port. The default setting is 192.168.2.1.
Subnet Mask Enter the subnet mask. The default setting is 255.255.255.0.
DHCP Server
Enable or disable DHCP server capability. The default setting is "Yes".
Enable
DNS Server 1 Enter DNS server address 1. The default setting is 8.8.8.8.
DNS Server 2 Enter DNS server address 2. The default setting is 208.67.222.222.
Allow IP
Enter the DHCP IP Pool starting address. The default setting is 192.168.2.100.
Address From
Allow IP Enter the DHCP IP Pool ending address.
Address To The default setting is 192.168.2.254.
Default IP
Enter the IP lease time (in seconds). The default setting is 43200.
Lease Time
LAN (when Method is set to "Switch")
IP Method Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
IP Address Enter the IP address for static IP settings. The default setting is 192.168.0.160.
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 45