Grandstream Networks UCM630 Series User Manual page 199

Default Destination
Strip
Prepend
Time Condition
Start Time
End Time
Date
Week
Destination

Conference

Call Queue

Ring Group

Paging/Intercom Groups

IVR

Voicemail Groups

Dial By Name

All
Select the default destination for the inbound call.

Extension

Voicemail

Conference Room

Call Queue

Ring Group

Paging/Intercom

Voicemail Group

DISA

IVR

External Number

By DID
When "By DID" is used, the UCM will look for the destination based on
the number dialed, which could be local extensions, conference, call
queue, ring group, paging/intercom group, IVR and voicemail groups as
configured in "DID destination". If the dialed number matches the DID
pattern, the call will be allowed to go through.

Dial By Name

Callback
Specify the number of digits to strip from the beginning of the DID. This is
used when "By DID" is selected in "Default Destination".
Specify the digits to be prepended before the call is placed via the trunk.
Those digits will be prepended after the dialing number is stripped.
Select the start time "hour:minute" for the trunk to use the inbound rule.
Select the end time "hour:minute" for the trunk to use the inbound rule.
Select "By Week" or "By Day" and specify the date for the trunk to use the
inbound rule.
Select the day in the week to use the inbound rule.
Select the destination for the inbound call under the defined time condition.

Extension
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 199