Grandstream Networks UCM630 Series User Manual page 174

Line and TO header in the SIP request to indicate the E.164 number. If set to
"Enable", "Tel:" will be used instead of "SIP:" in the SIP request. The default setting
is disabled.
Select whether the trunk needs to register on the external server or not when
Need Registration
"Register SIP Trunk" type is selected. The default setting is No.
If enabled outgoing calls even if the registration to this trunk fail will still be able to
Allow outgoing calls
go through.
if registration failure
Note that if we uncheck "Need Registration" option, this option will be ignored.
Configure the new name of the caller when the extension has no CallerID Name
CallerID Name
configured.
Configure the actual domain name where the extension comes from. This can be
used to override the "From" Header.
From Domain
For example, "trunk.UCM630X.provider.com" is the From Domain in From Header:
sip:1234567@trunk.UCM630X.provider.com.
Configure the actual username of the extension. This can be used to override the
"From" Header. There are cases where there is a single ID for registration (single
From User trunk) with multiple DIDs.
For example, "1234567" is the From User in From Header:
sip:1234567@trunk.UCM630X.provider.com.
Enter the username to register to the trunk from the provider when "Register SIP
Username
Trunk" type is selected.
Password Enter the password to register to the trunk when "Register SIP Trunk" is selected.
Auth ID Enter the Authentication ID for "Register SIP Trunk" type.
If enabled, the UCM will send 401 response to the incoming call to authenticate
Auth Trunk
the trunk.
Enable automatic recording for the calls using this trunk (for SIP trunk only). The
Auto Record default setting is disabled. The recording files can be accessed under Web
GUICDRRecording Files.
Allows external numbers the option to get directed to the extension that last called
them.
For Example: User 2002 has dialed external number 061234575 but they were not
Direct Callback reachable, once they have received missed call notification on their phone, they
would mostly call back the number, if the option "Direct Callback" is enabled then
they will be directly bridged to user 2002 regardless of the configured inbound
destination.
Advanced Settings
Select audio and video codec for the VoIP trunk. The available codecs are: PCMU,
Codec Preference PCMA, GSM, AAL2-G.726-32, G.726, G.722, G.729, G.723, iLBC, ADPCM,
H.264, H.265, H.263, H.263p and VP8.
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 174