Grandstream Networks UCM630 Series User Manual page 299

Disconnect
Call Park
Start/Stop Call Recording
Feature Code Digits Timeout
DND/Call Forward
Do Not Disturb (DND) Activate
Do Not Disturb (DND) Deactivate
Call Forward Busy Activate
Call Forward Busy Deactivate
Call Forward No Answer Activate

Default code: *0

Enter the code during active call. It will disconnect the call.

Options:
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.

Default code: #72

Enter the code during active call to park the call.

Options:
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.

Default code: *3

Enter the code followed by # or SEND to start recording the
audio call and the UCM630X will mix the streams natively on
the fly as the call is in progress.

Options:
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
Set the maximum interval (ms) between digits for feature code
activation

Default code: *77

Default code: *78

Default Code: *90

Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.

Default Code: *91

Default Code: *92

Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 299