Grandstream Networks UCM630 Series User Manual page 81

Email Template Sending
Format
Domain
SMTP Server
Enable SASL
Authentication
Username
Password
POP/POP3 Server Address
POP/POP3 Server Port
Display Name
Sender
The following figure shows a sample Email setting on the UCM630X, assuming the Email is using 192.168.6.202
as the SMTP server.

Client: Submit Emails to the SMTP server. A SMTP server is
required, and users need login with correct credentials.
Select the email template format to be sent. The "HTML" format is
compatible with most mail clients and is recommended. If the mail
client does not support the "HTML" format, please select the "Plain
Text" format.
Specify the domain name to be used in the Email when using type
"MTA".
Specify the SMTP server when using type "Client".
Enable SASL Authentication. When disabled, UCM will not try to use
the username and password for mail client login authentication. Most
of the mail server requires login authentication while some others
private mail servers allow anonymous login which requires disabling
this option to send Email as normal. For Exchange Server, please
disable this option.
Username is required when using type "Client". Normally it is the Email
address.
Password to login for the above Username (Email address) is required
when using type "Client".
Configure the POP/POP3 server address for the configured username
Example: pop.gmail.com
Configure the POP/POP3 server port for the configured username
Example: 995
Specify the display name in the FROM header in the Email.
Specify the sender's Email address.
For example: pbx@example.mycompany.com.
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 81