Grandstream Networks UCM630 Series User Manual page 97

Upgrade via
Server Path
File Prefix
Config Server Path
Allow DHCP Option 43/66
Automatic Upgrade
Firmware Upgrade Rule
Zero Config
Web Access
Admin Password
End-User Password
Web Access Mode
Web Server Port
RTSP Port
Enable UPnP Discovery
Login Settings
User Login Timeout
Maximum Consecutive
Failed Login Attempts
Login Error Lock Time
When URL is selected as firmware source, configure upgrade via TFTP,
HTTP or HTTPS.
When URL is selected as firmware source, configure the firmware
upgrading server path.
Configure the Config Server Path.
When URL is selected as firmware source, configure the firmware file
postfix. If configured, only the configuration file with the matching encrypted
postfix will be downloaded and flashed into the phone.
If DHCP option 43 or 66 is enabled on the LAN side, the TFTP server can
be redirected.
If enabled, the end point device will automatically upgrade if a new firmware
is detected. Users can select automatic upgrading by day, by week or by
minute.

By week
Once selected, specify the day of the week to check HTTP/TFTP
server for firmware upgrades or configuration files changes.

By day
Once selected, specify the hour of the day to check the HTTP/TFTP
server for firmware upgrades or configuration files changes.

By minute
Once selected, specify the interval X that the SIP end device will
request for new firmware every X minutes.
Specify how firmware upgrading and provisioning request to be sent.
Select either to enable or disable zero config.
Configure the administrator password for admin level login.
Configure the end-user password for the end user level login.
Select HTTP or HTTPS as the web access protocol.
Configure the port for web access.
The valid range is 1 to 65535.
Configure the RTSP Port.
Select either to enable or disable Enable UPnP Discovery
Configure the login settings.
Configure User Login Timeout.
Configure Maximum Consecutive Failed Login Attempts.
Configure Login Error Lock Time.
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 97