Grandstream Networks UCM630 Series User Manual page 301

Pickup In-call
Pickup Extension
Direct Dial Voicemail Prefix
Direct Dial Mobile Phone Prefix
Call Completion Request
Call Completion Cancel
Enable Spy
Listen Spy
Whisper Spy

Default Code: *45 (Disabled by default).

If "Pickup In-call" feature is enabled, only the extensions added
in "Allowed to seamless transfer" in the extension's Seamless
Transfer Privilege Control List" can pick up the call.

Default Code: *8

This code is for the pickup group, which can be assigned for
each extension on the extension configuration page.

If there is an incoming call to an extension, the other extensions
within the same pickup group can dial *8 directly to pick up the
call.

Default Code: *

This code is for the user to directly dial or transfer to an
extension's voicemail.

For example, directly dial *5000 will have to call go into the
extension 5000's voicemail. If the user would like to transfer the
call to the extension 5000's voicemail, enter *5000 as the
transfer target number.

Default Code: *88

If you have the permission to call mobile phone number, use
this prefix plus the extension number can dial the mobile phone
number of this extension directly.

Default Code: *11

This code is for the user who wants to use Call Completion to
complete a call.

Default Code: *12

This code is for the user who wants to cancel Call Completion
request.
Check this box to enable spy feature codes. Disabled by default.

Default Code: *54 ("Enable Spy" needs to be checked)

This is the feature code to listen in on a call to monitor
performance. Monitor's line will be muted, and neither party will
hear from the monitor's extension.

Default Code: *55 ("Enable Spy" needs to be checked)

This is the feature code to speak to one side of the call (for
example, whisper to employees to help them handle a call).
Only one side will be able to hear from the monitor's extension.
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 301