Grandstream Networks UCM630 Series User Manual page 128

will be ignored.
DND Time The time condition of DND. The DND will take effect while the time condition is
Condition satisfied.
If DND is enabled, calls from the whitelisted numbers will not be rejected. Multiple
numbers are supported and must be separated by new lines. Pattern matching is
supported.
DND Whitelist
Calls from users in the forward whitelist will not be forwarded.
Pattern matching is supported.
FWD Whitelist
Ring Simultaneously
Enable this option to have an external number ring simultaneously along with the
Ring
extension. If a register trunk is used for outbound, the register number will be used to
Simultaneously
be displayed for the external number as caller ID number.
Set the external number to be rang simultaneously. '-' is the connection character
External Number
which will be ignored.
Time Condition for
Ring the external number simultaneously along with the extension on the basis of this
Ring
time condition.
Simultaneously
Use callee DOD on Use the callee's DOD number as CallerID on Outgoing Forwarding or Ring
FWD or RS Simultaneously calls.
Monitor privilege control
Allow call-barging Members of the list can spy on this extension via feature codes.
Seamless transfer privilege control
Allowed to
Members of the list can seamlessly transfer via feature code.
seamless transfer
Other Settings
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM630X, which can be configured in
the
Ring Timeout
PromptCustom Prompt: General Preference. The valid range is between 5 seconds
and 600 seconds.
Note: If the end point also has a ring timeout configured, the actual ring timeout used
is the shortest time set by either device.

Z match any digit from 1-9，

N match any digit from 2-9，

X match any digit from 0-9.

Z match any digit from 1-9，

N match any digit from 2-9，

X match any digit from 0-9.
global ring timeout
UCM630X Series User Manual
Version 1.0.2.25
setting under Web GUIPBX SettingsVoice
P a g e | 128