Grandstream Networks UCM630 Series User Manual page 109

(1) Global Policy
This is the lowest level configuration. The global policy configured in Web GUIValue-added
FeaturesZero ConfigGlobal Policy will be applied here. Clicking on "Modify Global Policy" to
redirect to page Value-added FeaturesZero ConfigGlobal Policy.
(2) Global Templates
Select a global template to be used for the device and click on
can be selected, and users can arrange the priority by adjusting orders via
global templates will take effect. If the same option exists on multiple selected global templates, the
value in the template with higher priority will override the one in the template with lower priority. Click on
to remove the global template from the selected list.
(3) Default Model Template
Default Model Template will be applied to the devices of this model. Default model template can be
configured in model template under Web GUIValue-added FeaturesZero ConfigModel
Templates page. Please see default model template option in
(4) Model Templates
Select a model template to be used for the device and click on
can be selected, and users can arrange the priority by adjusting orders via
model templates will take effect. If the same option exists on multiple selected model templates, the
value in the template with higher priority will override the one in the template with lower priority. Click on
to remove the model template from the selected list.
(5) Customize Device Settings
This is the highest-level configuration for the device. Click on "Modify Customize Device Settings" and
following dialog will show.
UCM630X Series User Manual
Version 1.0.2.25
to add. Multiple global templates
and . All the selected
[Table 32: Create New Model Template].
to add. Multiple model templates
and . All the selected
P a g e | 109