Grandstream Networks UCM630 Series User Manual page 46

Subnet Mask Enter the subnet mask address for static IP settings. The default setting is 255.255.0.0.
Gateway IP Enter the gateway IP address for static IP settings. The default setting is 0.0.0.0.
DNS Server 1 Enter the DNS server 1 address for static IP settings. The default setting is 0.0.0.0.
DNS Server 2 Enter the DNS server 2 address for static IP settings.
Username Enter the username to connect via PPPoE.
Password Enter the password to connect via PPPoE.
Layer 2 QoS
802.1Q/VLAN Assign the VLAN tag of the layer 2 QoS packets for LAN port. The default value is 0.
Tag
Layer 2 QoS
802.1p Priority Assign the priority value of the layer 2 QoS packets for LAN port. The default value is 0.
Value
LAN 1 / LAN 2 (when Method is set to "Dual")
If "Dual" is selected as "Method", users will need assign the default interface to be LAN 1
Default
(mapped to UCM6302 WAN port) or LAN 2 (mapped to UCM6302 LAN port) and then
Interface
configure network settings for LAN 1/LAN 2. The default interface is LAN 2.
IP Method Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
IP Address Enter the IP address for static IP settings. The default setting is 192.168.0.160.
Subnet Mask Enter the subnet mask address for static IP settings. The default setting is 255.255.0.0.
Enter the gateway IP address for static IP settings when the port is assigned as default
Gateway IP
interface. The default setting is 0.0.0.0.
Enter the DNS server 1 address for static IP settings.
DNS Server 1
The default setting is 0.0.0.0.
DNS Server 2 Enter the DNS server 2 address for static IP settings.
Username Enter the username to connect via PPPoE.
Password Enter the password to connect via PPPoE.
Layer 2 QoS
Assign the VLAN tag of the layer 2 QoS packets for LAN port.
802.1Q/VLAN
The default value is 0.
Tag
Layer 2 QoS
802.1p Priority Assign the priority value of the layer 2 QoS packets for LAN port. The default value is 0.
Value
IPv6 Address
WAN (when "Method" is set to "Route")
IP Method Select Auto or Static. The default setting is Auto
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 46