Advertisement
SUBJECT: F-40 SERVICE MANUAL MODIFICATION
Page: 04-20
Table location: Mode No. 34/Comments
Incorrect: Shifts all bias levels including ID pattern bias.
Correct: Shifts all bias levels except for ID Pattern bias.
Page: 04-21
Table location: Mode No. 48/Comments
Incorrect: (Factory setting = 65)
Correct: (Factory setting = 64, Max. 80V)
Page: 04-22
Table location: Mode No. 60/Function (last line)
Incorrect: less than 0.5V
Correct: less than 0.4V
Page: 04-23
Table location: Mode No. 68/Comments
Delete the following text: No double counts of A3 or 11"x17" copies fed from by-pass
Page: 04-24
Table location: Mode No. 83/Comments
Incorrect: is displayed. If "0" is entered, max. is 999. Otherwise, max. is number entered.
Correct: is displayed. Max. is the number entered.
Page: 04-29
Location: LANGUAGE CODE TBLE
Add "5: Spanish" and "5: Dutch" to the list of languages in the SP13 column.
Note: This list is the same as that in row 2 (010).
Page: 04-30
Location: Items #10,17 and 18
Replace item #10 with item #17 (i.e. delete #10 and change #17 into #10) and
change #18 into #17.
Page: 05-10
Location: Illustration
Make a callout [C] to unmarked side plate cutout. Spring plate callout [C] change to [D]
Page: 05-28
Location: Steps 3 and 4
Incorrect: one-eighth of Vsg.
Correct: one-tenth of Vsg.
Page: 05-32
Location: Steps 9 -- 13
Renumber 9 through 13 to 7 through 11. (Numbers are continuing from previous page.)
Page: 05-46
Location: HOT ROLLER TEMPERATURE ADJUSTMENT, Measure
Incorrect: 10°C/step
Correct: 1°C/step
Page: 05-58
Location: step 5
Incorrect: [A] (2 screws).
Correct: [A] (4 screws).
Technical Bulletin
feed table.
No. RTB-001
DATE: Dec.31 1990
PAGE: 5 of 10
Advertisement
