Advertisement
SUBJECT: Sorter installation procedure correction for the F40.
PREPARED BY: M. Ninomiya
CHECKED BY:
CLASSIFICATION:
Action Required
Troubleshooting
Retrofit Information
1) Installation procedure correction in the service manual.
Two steps [A] were inserted on page 8-14, between steps 12 and 13 of the current F40
service manual.
13. Peel off the cover [C] from the Sort/Staple key panel (left side of the operation
panel).
14. Remove the Staple Position key top [D], and affix the Sort/Stack key cover [E]
(copier accessory) as shown.
Technical Bulletin
FROM: Copier Technical Support Sec.
Revision of service manual
Information only
Other
No. RTB-010
DATE: Jun.15,'91
PAGE: 1 of 2
MODEL: F40
[A]
Advertisement
