Advertisement
SUBJECT: Sorter installation procedure correction for the F40
2) Installation procedure correction for the booklet in the machine container.
Illustration [A] was added, and steps [B] were inserted between installation procedure
steps 8 and 9.
9. Peel off the cover [C] from the Sort/Staple key panel (left side of the operation panel).
10. Remove the Staple Position key top [D], and affix the Sort/Stack key cover [E]
(copier accessory) as shown.
11.Set SP71-1 to enable the sorter. (Refer to the copier installation procedure.)
NOTE: Corrected installation procedure will be enclosed from August '91 production.
Technical Bulletin
No. RTB-010
DATE: Jun. 15, '91
PAGE: 2 of 2
[A]
[B]
Advertisement
