Advertisement
SUBJECT: Improper Stapling
B)
1. Remove the staple cartridge, then check for any staples jammed in the stapling
mechanism [A]. To remove jammed staples, spread apart the side plates [B] and slide
up the front pressure guide plate [C].
NOTE: When installing the staple cartridge, make sure that all the staple sheets are
be in the initial position [D], i.e. the staple sheets have not slid forward into
the staple sheet guide [E].
2. Install the staple cartridge, then make copies in double stapling mode until the staple
sheet reaches the stapling position.
[A]
[D]
Technical Bulletin
Correct
[B]
[C]
Incorrect
No. RTB-007
DATE: Mar 31,1991
PAGE: 3 of 3
[E]
Advertisement
