Advertisement
SUBJECT: Original misfeed.
(For cause 2)
1. Remove the two screws of the pull out
hinge [D].
2. Insert 2 pcs each of 0.8 mm spacer
(P/No. 07010040) and fix the screws.
[E].
•
This can give the registration sensor
enough clearance for the sensor pad.
Permanent Countermeasure:
The shape of the pull out bracket (P/No. A4651057) will be modified so that the sensor
pad is positioned 1.5 mm further from the DF registration sensor.
Soon after the modification is applied to the production, an M/B will be issued.
Technical Bulletin
[E]
No. RTB-017
DATE:
Mar. 15, 1993
PAGE: 2 of 2
[D]
Advertisement
