Advertisement
SUBJECT: F-40 SERVICE MANUAL MODIFICATION
Page: 09-19
Location: item 9 in list
Delete item #9 and renumber the list.
Page: 09-25
Location: step #18, substep 1)
Incorrect: 1) Remove the RDH rear cover [A] (5 screws), then set the DIP SW 101-2 on to
change timing registaration mode.
Correct: 1) Remove the RDH rear cover [A] (5 screws), then turn on DIP SW 101-2 to
change to timing registration mode.
Page: 09-32
Location: Between step 1 and 1)
Add the following text, then renumber the steps:
1) Remove the RDH rear cover [A] (5 screws), then turn on DIP SW 101-2
to change to timing registration mode.
Page: 10-06
Location: 2nd line of 1st paragraph
Incorrect: The motor and
Correct: The belt-drive motor and
Page: 10-20
Location: item 10 of list
Incorrect: 10. Pan Head Screw with Washer
Correct: 10. Pan head Screw (Long)
Page: 10-20
Location: item 15 of list
Incorrect: 15. Rubber Tightener
Correct: 15. Rubber Washer
Page: 10-20
Location: Between items 18 and 19 of list
Add the following item, then renumber the list:
19. Decal -- Staple Position
Page: 12-09
Location: Code #56, Definition
Incorrect: SC #55 lights
Correct: SC#56 lights
Page: 12-12
Location: Code #86, Definition
Incorrect: the SC #85 counter
Correct: the SC #86 counter
Page: 12-16
Location: Code #B8, Definition
Incorrect: SC #B8 if the does
Correct: SC #B8 if the one-turn sensor does
Page: 12-18
Table location: row 5 in the Name column
Incorrect: 2nd and 3rd Lift
Correct: 1st, 2nd and 3rd Lift
Technical Bulletin
No. RTB-001
DATE: Dec.31 1990
PAGE: 8 of 10
Advertisement
