Advertisement
SUBJECT: F-40 SERVICE MANUAL MODIFICATION
Page: 07-07
Location: 1st line in the 3rd paragraph
Incorrect: and the paper width
Correct: and the original width
Page: 07-07
Location: The 7th line from the bottom
Incorrect: the original until 140 milliseconds
Correct: the original until 85 milliseconds
Page: 07-33
Location: section title
Incorrect: 13.2 PAPER FEED UNIT REMOVAL
Correct: 13.2 FEED-IN UNIT REMOVAL
Page: 07-36
Location: section title
Incorrect: 13.5 PAPER FEED CLUTCH REPLACEMENT
Correct: 13.5 FEED-IN CLUTCH REPLACEMENT
Page: 07-38
Locaton: section title
Incorrect: 13.7 PAPER FEED MOTOR REPLACEMENT
Correct: 13.7 BELT DRIVE MOTOR REPLACEMENT
Page: 07-40
Location: section title
Incorrect: 13.9 PAPER FEED ROLLER REPLACEMENT
Correct: 13.9 ORIGINAL FEED ROLLER REPLACEMENT
Page: 07-46
Location: after step 3
Add the following note:
NOTE: When removing the PCB, be careful not to damage any of the components that
protrude from the board.
Page: 08-13
Location: top illustration
Switch callouts [A] and [B].
Page: 09-17
Location: 3rd line in 1st paragraph.
Incorrect: When the DF is lifted
Correct: When the RDH is lifted
Page 09-19
Location: list
Incorrect: 10. Pan head Screw 4 x 6
Incorrect: 11. Pan head Screw
Incorrect: 12. Pan head Screw 4 x 8
Correct: 10. Pan head Screw 4 x 6
Correct: 11. Washer
Correct: 12. Shoulder Screw 4 x 10
Technical Bulletin
9
1
8
11
1
8
No. RTB-001
DATE: Dec.31 1990
PAGE: 7 of 10
Advertisement
