Advertisement
SUBJECT: LCT Side to Side Registration Adjustment
Adjustment procedure
1. Remove the LCT right, front, and rear cover (2, 4 and 5 screws).
* Refer to steps 1 and 2 of LCT Unit Removal on p. 5-3 of the service manual.
2. Loosen 6 screws [B], Then slide the LCT unit to the front or rear to adjust the side
registration, then tighten the 6 screws.
3. Check the side registration again.
Technical Bulletin
No. RTB-003
DATE: Feb. 15, '91
PAGE: 2 of 2
Advertisement
