Advertisement
SUBJECT: F-40 SERVICE MANUAL MODIFICATION
Page: 04-11
Location: step 2 of Staple Mode
Incorrect: 2. Press SW 100 to start the finisher operation.
Correct: 2. Press SW 100 to put finisher off-line operation on standby.
Page: 04-11
Location: step 4 of Staple Mode
Incorrect: 4. Press SW 101 to stop finisher operation.
Correct: 4. Press SW 101 to end finisher off line operation.
Page: 04-13
Location: bold-text paragraph
Incorrect: 34, 80, 81, 90, 91,
Correct: 34, 80, 81, 91,
Page: 4-16,17 Location: table
Incorrect:
Correct:
Page: 04-18
Table location: Mode No.8/Comments
Incorrect: (Page 4-9)
Correct: (Page 4-15)
Page: 04-18 Table location: Mode No. 9/Comments
Incorrect: (Page 4-10)
Correct: (Page 4-16)
Page: 04-19
Table location: Mode No. 26/Data
Incorrect: 0: NO (50)
Correct: 0: NO
Incorrect: 1: YES (30)
Correct: 1: YES
Technical Bulletin
11 Not Used (Japanese Machine Only)
12 Second Paper Feed Clutch
13 Third Paper Feed Clutch
21 Not Used
22 Second Pick-up Solenoid
23 Third Pick-up
33 First Pick-up Solenoid
11 Second Paper Feed Clutch
12 Third Paper Feed Clutch
13 Not Used (Japanese Machine Only)
21 Second Pick-up Solenoid
22 Third Pick-up Solenoid
23 Not Used (Japanese Machine Only)
33 Manual Pick-up Solenoid
No. RTB-001
DATE: Dec.31 1990
PAGE: 4 of 10
Advertisement
