Advertisement
SUBJECT: Installation Procedure change
PREPARED BY:
CHECKED BY:
CLASSIFICATION:
Action Required
Troubleshooting
Retrofit Information
Since the location of shipping tape on the cassette bank section has been changed and a
cushion has been added, the procedure has been changed as follows:
OLD
6. Slide out the paper feed unit [B], then remove all strips of filament tape [C].
NEW
6. Slide out the paper feed unit [B], then remove all strips of filament tape [C] and the
cushion [D].
This modification is applied from the 1991 May production run.
Technical Bulletin
F. Noguchi
T. Ito
Revision of service manual
Information only
Other
[B]
FROM: Copier Technical Support Section
MODEL:
[C]
[B]
[C]
[D]
No. RTB-009
DATE: May 31,1991
PAGE: 1 of 1
F 40
Advertisement
