Installing The Appliance - Panasonic HL-SF498S Operating Instructions Manual

Installing the Appliance

Electrical connection
Electrical work must be performed by
a legally qualified electrician. Improper
wire connections may cause electric
leakages or fires.
§
Turn off power at the circuit breaker.
§
Before connection, check that
the mains voltage and frequency
corresponds to that indicated on
the rating label fixed to the inside
of the appliance. This data must
correspond in order to avoid the risk
of damage to the appliance.
§
Check that the domestic power
supply guarantees adequate
earthing.
§
The appliance must be connected
to earth in compliance with electrical
system safety regulations.
§
A fixed connection is to be used,
fitting the power line with a suitably
rated omnipolar circuit breaker with
a contact opening gap equal to or
greater than 3 mm, in an easily
accessible position close to the
appliance.
§
The appliance must only be
connected with the power cable
provided.
§
The wires in the mains lead fitted
to this appliance are coloured
in accordance with the following
code:
Electrical cable
Wire connection
: Yellow / Green
(Connect to the earth terminal)
N: Blue
L: Brown
(Connect to the live terminal)
N
L
97
EN