Steam Clean - Panasonic HL-SF498S Operating Instructions Manual

Cleaning Programs

Steam Clean

This program generates steam inside
the cavity to help remove the dirt easily.
Cleaning l Steam Clean
Remove all accessories before using
this program.
Fill up the water tank to the maximum
before use.
Touch Cleaning, then Steam Clean.
Touch Stop/Start. The program will
begin and the time in the display will
count down.The program duration is
approximately 20 minutes.
After the program has finished, dry the
condensation inside the cavity with a
soft cloth.
Empty the drain tank.
12:00
20 00
m s
Duration
Note
§
Do not remove the drain tank
during the Steam Clean program.
If the drain tank is removed during
the program, it will stop and goes
back to clock display.
§
Empty both tanks and clean with
warm water after the program has
finished.
87
EN