Welcome Screen And Good-Bye Screen; Warning Screen; Basic Screens - Subaru Impreza 2016 Manual

The warning screen will return to the
original screen after a few seconds. While
the information reminder is shown on
the display, it may be possible to display
the warning screen again. To recall the
message marked with on the display,
pull the /SET switch on the steering
wheel toward you.
& Welcome screen and Good-
bye screen
When the driver s door is opened and
closed after unlocking the door, the
welcome screen will appear on the multi
information display for approximately 20
seconds.
When the ignition switch is turned to the
LOCK / OFF position, the multi informa-
tion display gradually turns off (Good-bye
screen).
NOTE
. The basic screen will be shown
when the ignition switch is turned to
the "ON" position while the welcome
screen is displayed.
. Once the welcome screen appears,
it takes a certain period of time to
display it again.
. If the ignition switch is operated
after unlocking the driver's door, the
welcome screen will not appear even
Instruments and controls/Multi information display (models with type B combination meter)
when the driver's door is opened and
closed.
. The welcome screen will disappear
when you lock the driver's door by
using the remote keyless entry system
(all models) or the keyless access
function (if equipped) while the wel-
come screen is displayed.
. If any of the doors (including the
rear gate) is opened while the welcome
screen is displayed, the door ajar
warning will appear.
. The welcome screen can be set to
on or off. For details, refer to "Welcome
Good-bye Screen" F3-50.
& Warning screen
Example of warning
If there is a warning message or a
maintenance notification, it will appear for
approximately 3 seconds. Take the appro-
priate actions based on the messages
indicated.
& Basic screens
By operating the or
steering wheel, you can change the
screen that is always displayed.
– CONTINUED –
3-47
switch on the