Table of Contents
Advertisement
2 Settings
–
Stream(3): 320´180
[Transmission priority]
Select a transmission priority for "Stream" from the following.
•
Constant bit rate: H.265 images will be transmitted with the bit rate selected for "Max bit rate (per
client)*".
•
VBR: H.265 images will be transmitted with the frame rate selected for "Frame rate*" while maintaining the
image quality level selected in "Image quality". In this case, images will be transmitted with the bit rate kept
within the maximum bit rate that is set for "Max bit rate (per client)*". The recording capacity changes
according to the "Image quality" setting and conditions of the subject.
•
Frame rate: H.265 images will be transmitted with the frame rate selected for "Frame rate*".
•
Best effort: In accordance with the network bandwidth, H.265 images will be transmitted with the maximum
bit rates that are set for "Max bit rate (per client)*".
•
Default: VBR
Note
•
When "Frame rate" is set for "Transmission priority", number of users who can access the camera may
be limited.
[Frame rate*]
Select a frame rate from the following.
–
When 30fps mode is selected for [Image capture mode]:
1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps*/ 15fps*/ 20fps*/ 30fps*
–
When 25fps mode is selected for [Image capture mode]:
1fps/ 3.1fps/ 4.2fps*/ 6.25fps*/ 8.3fps*/ 12.5fps*/ 20fps*/ 25fps*
Default: Stream(1): 30fps*, Stream(2) and Stream(3): 15fps*
Note
•
If "On" is selected for "Stream(2)" or "Stream(3)", the maximum frame rate changes as follows
depending on the setting of "Image capture mode":
–
16:9 (30fps mode)/4:3 (30fps mode): 15fps*
–
16:9 (25fps mode)/4:3 (25fps mode): 12.5fps*
•
"Frame rate*" is restricted by "Max bit rate (per client)*". For this reason, the frame rate may be lower
than the specified value when any value marked with an asterisk (*) is selected. When "VBR" is selected
for "Transmission priority", depending on the settings of "Max bit rate (per client)*" and "Image
quality", transmission of images may periodically be paused. Check the transmission of images after
changing settings.
•
Depending on the number of users connecting at the same time or the combination of features used,
the frame rate may be lower than the configured value.
Check the transmission of images after changing settings.
[Max bit rate (per client)*]
Select an H.265 bit rate per a client from the following.
64kbps/ 128kbps*/ 256kbps*/ 384kbps*/ 512kbps*/ 768kbps*/ 1024kbps*/ 1536kbps*/ 2048kbps*/ 3072kbps*/
4096kbps*/ 6144kbps*/ 8192kbps*/ 10240kbps*/ 12288kbps*/ 14336kbps*/ 16384kbps*/ 20480kbps*/
24576kbps*/ –– FREE ENTRY––
When "–– FREE ENTRY––" is selected, the bit rate can be freely entered.
•
Default:
–
Stream(1): 10240kbps*
U113x
–
Stream(2): 1536 kbps*
–
Stream(3): 768 kbps*
68
Operating Instructions
U154x
U213x
U254x
U114x
U214x
/6144kbps*
U153x
U253x
Advertisement
Table of Contents
