Table of Contents
Advertisement
Item
Max. number of certificates included
in the PEM format
Max. size of certificate (including
intermediate CA Certificate)
[Client Certificate] - [Information]
not installed: indicates that the certificate is not installed.
Certificate host name: indicates that the certificate is installed.
Expired: indicates that the certificate is expired.
The details of Client Certificate can be checked with the [Confirm] button.
When the [Delete] button is clicked, the client certificate will be deleted.
Note
•
Check that the client certificate has not expired. If you use a certificate that has expired, you may not
be able to connect to authentication LAN switches.
[EAP method]
Select the authentication method from EAP-MD5, EAP-PEAP or EAP-TLS.
EAP-MD5/EAP-PEAP
1.
Select "On" for "IEEE 802.1X".
2.
Select "EAP-MD5" or "EAP-PEAP" for "EAP method".
3.
Click the [Set] button after entering the user name, the password, and confirming the password.
EAP-TLS
1.
Click the [Browse] button of "CA Certificate" - "Certificate install". Then, select a CA Certificate and click
the [Execute] button. The host name (CommonName) specified when creating certificates will be displayed
for "Information".
2.
Click the [Browse] button of "Private key or Client Certificate including private key", and select a private
key or Client Certificate that includes Private key.
3.
Enter the password if the private key is encrypted or the password is set for Client Certificate for the PFX
method. Leave password blank when not encrypted.
4.
Click the [Execute] button to start installation.
"installed" will be displayed for "Install status of private key".
In the case of selecting Client Certificate including the private key, "installed" will be displayed for "Client
Certificate" - "Information" as well.
5.
When the private key is installed in step 2, select a Client Certificate after clicking the [Browse] button of
"Client Certificate", and then click the [Execute] button. The host name (CommonName) specified when
creating certificates will be displayed for "Information".
6.
Select "On" for "IEEE 802.1X". Then, select "EAP-TLS" for "EAP method".
7.
Enter the user name registered to the server in "User name". Then, click the [Set] button.
If no user name is registered to the server, enter an arbitrary user name.
"Password" and "Retype password" can be left blank.
Note
•
To delete each certificate, set [IEEE 802.1X] to "Off".
•
Check that the CA certificate and client certificate have not expired. If you use certificates that have
expired, you may not be able to use the port notification feature.
Specifications
6 pc.
Approx. 10 kB
Remarks
—
—
Operating Instructions
2 Settings
117
Advertisement
Table of Contents
