•
When the image color is close to monochrome, detection of SCD alarms may become difficult. When
no alarms is detected, increase "Detection sensitivity" or set smaller "Detection area".
[Status]
Select "On" or "Off" to determine whether or not to perform SCD.
•
On: Performs SCD.
•
Off: Does not performSCD.
•
Default: Off
[Detection area]
Set the detection ratio "Small", "Middle" or "Large", which specifies how much of change in the area set in
[SCD area] to be detected.
•
Default: Middle
[Detection sensitivity]
Adjust the SCD sensitivity in the SCD area and select from "Very Low", "Low", "Middle", or "High".
•
Default: Middle
[Detection time]
The SCD function issues an alarm when the scene change continues for a specified time of period.
3s/5s/10s/30s/1min
•
Default: 3s
[All areas]
Set the entire image in the SCD area.
[Delete] button
Click the [Delete] button to be deleted the selected area.
2 Settings
Operating Instructions
103