Table of Contents
Advertisement
Stream information display
Displays the setup for image capture size, bit rate, and frame rate for the live view of a stream.
Note
•
Displays the values set in the stream. The actual bit rate and frame rate vary depending on the
network environment and the used PC.
[Refresh interval] pull-down menu
This pull-down menu will be displayed only when a JPEG image is displayed. Use it to select the display
method of the JPEG image.
•
MJPEG: Uses viewer software to display JPEG images successively as MJPEG (Motion JPEG). Not
available if the viewer software is not installed.
•
Refresh interval : 1s/Refresh interval : 3s/Refresh interval : 5s/Refresh interval : 10s/Refresh
interval : 30s/Refresh interval : 60s: Refreshes JPEG format (still images) images at the specified
interval.
Note
•
Depending on the network environment or the PC used, JPEG format (still images) images may
not be refreshed at the specified interval.
[Zoom] buttons
Images will be zoomed in on with the electronic zoom by the viewer software "Network Camera View
5S".
•
[x1] button: The images in the main area will be displayed at x1.
•
[x2] button: The images in the main area will be displayed at x2.
•
[x4] button: The images in the main area will be displayed at x4.
Note
•
When displaying in the JPEG format (still image), the electronic zoom will become inoperable.
[Brightness] buttons
*2
The brightness is adjustable from 0 to 255. Click the
button to make the image darker. If you click the [Normal] button, the display will be reset to default.
[Rec. on SD] button
*2
The [Rec. on SD] button will be displayed only when "Manual" is selected for "Save trigger" on the [SD
memory card] tab. (®page 59)
Click this button to manually record images on the SD memory card. Refer to page 23 for descriptions
of how to manually record images on the SD memory card.
[Log/Play] button
When the [Log/Play] button is clicked, the log list will be displayed and images saved on the SD memory
card can be played.
Refer to page 26 for further information about the log list and for how to play images on the SD memory
card.
[Viewer software] button
Starts installation of the viewer software for display. This button will not be available if the viewer software
is already installed on the PC, or if the "Automatic installation" of the [Viewer software
(nwcv5Ssetup.exe)] in the [Basic] tab is set to "Off". (®page 54)
Camera title
The camera title entered for "Camera title" on the [Basic] tab will be displayed. (®page 51)
Support button
When this button is clicked, the support site below will be displayed in a newly opened window. This website
contains technical information, FAQ, and other information.
https://security.panasonic.com/training_support/support/
Alarm occurrence indication button
When an alarm occurs, the display flashes. When this button is clicked, the button will disappear.
button to make the image brighter, or click the
*2
1 Operations
Operating Instructions
13
Advertisement
Table of Contents
