Access The Camera Using The Https Protocol (For Ca Certification); Access The Camera Using The Https Protocol - Panasonic WV-U2500 Series Operating Instructions Manual

If the camera is accessed using the HTTPS protocol for the first time, the warning window will be
displayed. In this case, follow the instructions of the wizard to install the self-signed (security) certificate.
(®page 144)
•
When using CA certificate:
In advance, install the root certificate and intermediate certificate on the browser in use. Follow the
instructions of CA for how to obtain and install these certificates.
•
When the camera is accessed using the HTTPS protocol, the refresh interval and frame rate of images
may be lower.
•
When the camera is accessed using the HTTPS protocol, it may take time to display images.
•
When the camera is accessed using the HTTPS protocol, the images may be distorted.
•
The maximum number of concurrent access user varies depending on the maximum image size and
transmission format.
2.8.4 Access the camera using the HTTPS protocol (for CA
Certification)
1.
Start up the web browser.
2.
Enter the IP address of the camera in the address box of the browser.
•
Example of entry: https://192.168.0.10/
IMPORTANT
•
When the HTTPS port number is changed from "443", enter "https://IP address of the camera + :
(colon) + port number" in the address box of the browser.
(Example: https://192.168.0.11:61443)
•
When the camera is in a local network, configure the proxy server setting of the web browser (under
[Internet Options...] under [Tools] of the menu bar) to bypass the proxy server for the local address.
3.
Press the [Enter] key on the keyboard.
→
The "Live" page will be displayed.
IMPORTANT
•
When the camera is accessed using the HTTPS protocol, the refresh interval and frame rate of
images may be lower.

2.8.5 Access the camera using the HTTPS protocol

1.
Start up the web browser.
2.
Enter the IP address of the camera in the address box of the browser.
•
Example of entry: https://192.168.0.10/
IMPORTANT
•
When the HTTPS port number is changed from "443", enter "https://IP address of the camera + :
(colon) + port number" in the address box of the browser.
(Example: https://192.168.0.11:61443)
•
When the camera is in a local network, configure the proxy server setting of the web browser (under
[Internet Options...] under [Tools] of the menu bar) to bypass the proxy server for the local address.
3.
Press the [Enter] key on the keyboard.
→
The "Live" page will be displayed.
When the security alert window is displayed, install the security certificate. (®Page 144)
2 Settings
Operating Instructions 143