Table of Contents
Advertisement
Note
•
To use the CA certificate, follow the requests from the CA about the information to be entered.
•
The available characters for [Common Name], [State], [Locality], [Organization], [Organizational
Unit] are 0-9, A-Z, a-z and the following marks.
- . _ , + / ( )
3.
Click the [OK] button after entering the items.
→
The [Save As] dialog box will be displayed.
4.
Enter a file name for the CSR in the [Save As] dialog box to save on the PC.
→
The saved CSR file will be applied to the CA.
IMPORTANT
•
The CA certificate will be issued for the set of the generated CSR and CRT key. If the CRT key is
re-generated or updated after applying to the CA, the issued CA certificate will be invalidated.
Note
•
This camera generates the CSR file in the PEM format.
2.8.3.4 Installation of the CA certificate
IMPORTANT
•
If the CSR file is not generated, it is impossible to install the CA certificate.
•
For the installation of the CA certificate, the CA certificate issued by CA is required.
1.
Click the [Browse...] button of "CA Certificate - CA Certificate install".
→
The [Open] dialog box will be displayed.
2.
Select the CA certificate file and click the [Open] button. Then, click the [Execute] button.
→
The CA certificate will be installed.
Note
•
The host name registered in the installed CA certificate will be displayed on "CA Certificate -
Information". Depending on the status of the CA certificate, the following are displayed.
Invalid
[CA certificate Host name]
Expired
Indication
Description
The CA certificate is not installed.
The CA certificate has already been installed and
validated.
The CA certificate has already expired.
2 Settings
Operating Instructions
141
Advertisement
Table of Contents
