Panasonic WV-U2500 Series Operating Instructions Manual page 53

•
Default: Upper left
Note
•
When [Image rotation] is set to "90 °" or "270 °", only "Upper left" or "Lower left" can be selected for
[Camera title position].
[OSD] - [Character size]
Select the character size of the date and time as well as text displayed in the image.
•
100%: Displays in the standard size.
•
150%: Displays in 150% of the standard size.
•
200%: Displays in 200% of the standard size.
•
Default: 100%
IMPORTANT
•
If the settings for [Date/time position] and [Camera title position] are different, the frame rate may be
lower than the specified value.
•
If the settings for [Date/time position] and [Camera title position] are different, characters may be
displayed incorrectly or overlapped depending on the [Character size] setting and the number of
characters used. After completing the settings, confirm the result on the "Live" page.
•
If "150%" or "200%" is selected for [Character size], the frame rate may be lower than the specified
value.
•
Depending on the setting and the numbers of characters used for [Character size], and the setting and
image capture size of images, characters displayed on the screen may be cut off. After completing the
settings, confirm the result on the "Live" page.
[Brightness status display]
Select "On" or "Off" to determine whether or not to display the status of brightness on images displayed on the
"Live" page when adjusting brightness.
•
Default: On
[Image rotation]
Set whether or not to rotate the image (JPEG, H.265).
•
0 °(Off): Does not rotate the image.
•
90 °: Rotates the image by 90 degrees.
•
180 °(Upside-down): Turns the image upside down.
•
270 °: Rotates the image by 270 degrees.
•
Default: 0 °(Off)
IMPORTANT
•
The position shifts if the image rotation setting is changed when the following area settings are
configured. Therefore, configure the settings for each area after configuring the image rotation.
–
Privacy zone (®page 87)
–
VMD area (®page 98)
–
SCD area (®page 102)
–
VIQS area (®page 89)
–
Mask area (®page 81)
•
If "90 °" or "270 °" is selected for "Image rotation", depending on the "Character size" setting and the
number of characters used, characters displayed on the screen may be cut off.
•
When "90 °" or "270 °" is selected for "Image rotation", the position selectable with "Date/time
position" and "Camera title position" is limited to "Upper left" or "Lower left".
2 Settings
Operating Instructions 53